Rear Shock Mount (Clink, Clink, Clink coming from the rear)

[Kenny2g]

Rear Shock Mount (Clink, Clink, Clink coming from the rear shocks)

Have anyone here changed their Rear Shock mount? How easy is it? I've changed brake pads before. Do you think this a job that i can do? Also how long or any special tool needed for this job?

 

[flyinH]

changing the rear shock mounts is easy.take the side inner trunks panels off first,undo the shock bolt all the way,then loosen(don't take them all the way off yet) the two rsm bolts on the side that you want to do first,jack that side up,and then loosen the two rsm bolts all the way.the rsm should just pop out(might need alittle force).if you have any aftermarket suspension stuff,or bigger wheels than oem,think about the rsm's with replaceable mounts.

 

[vlad]

I used to replace those shock mounts about every two years, until I bought the rear shock mounts from Ground Control. I highly recommend them.

 

[Kenny2g]

Guys, your not tell me if this is an easy fix. Will i exprience alot of problem doing this or can i do it?

 

[flyinH]

changing the rear shock mounts is easy

piece of cake.all you need is a good rathcet set and a jack.