The OE radiator finally busted at the upper hose neck last week, result was red light zone overheating and a tow ride home. Installed a new Nissens radiator and added coolant but am not getting the coolant to fill the whole system. The heater does not blow anything near hot and in a couple block test drive the temp gage broadcast red. How to get the system to circulate and then take more fluid?
This has the side overflow tank and I've opened the bleeder screw but it had little effect on the level in the tank. I also have taken the top hose off and poured coolant that direction. In the test drive the upper hose got hotter than the lower hose. Ideas or experiences to cure these ills?
This has the side overflow tank and I've opened the bleeder screw but it had little effect on the level in the tank. I also have taken the top hose off and poured coolant that direction. In the test drive the upper hose got hotter than the lower hose. Ideas or experiences to cure these ills?